Table of Contents
Advertisement
IX. SOFTWARE DRIVERS
8. The "Video Environment Configuration Screen" will appear.
Please follow the following procedures to configure your video display
environment.
(1)
In Main-Display" item,
(a) Press <Enter> The selection menu will appear.
(b) In selection menu, move cursor to "RCPADI". Press <Enter> to
select.
(2)
In "Material-Display" item,
(a) Press <Enter> The selection menu will appear.
(b) In selection menu, move cursor to "RCPADI". Press <Enter> to
select.
(3)
In "Render-Display" item,
(a) Press <Enter> The selection menu will appear.
(b) In selection menu, move cursor to "RCPADI" or "RDPADI". Press
<Enter> to select.
(4)
Complete the other selections and exit configuration.
9. After exit configure, 3DS will boot automatically using the environment you
just select.
10. If your previous configuration is OK, 3DS will ask you to make detail configu-
ration for SiS 5597/5598 drivers. If this didn't happen, please check your previ-
ous procedures or contact the technical support people.
11. In the detail configuration for SiS 5597/5598 drivers, just follow the instruc-
tions appear on the screen and make your own choice. If you are confused in
anything, contact the technical support people for solution.
12. After detail configuration, you will enter the 3DS main display screen and
you may begin your 3D Studio work in the environment you make before.
13. Once completing the detail configuration,
same configuration simply by type \3DS3\3DS <Enter> next time.
14. If you want to change your video configuration, just follow the procedures men-
tioned before to re-configure.
ASUS SP98-N User's Manual
you may enter 3D Studio in the
93
Advertisement
Table of Contents
