Asus SP98-N User Manual page 26

12. Primary IDE Connector (40-1pin IDE)
This connector supports the provided IDE hard disk drive ribbon cable. After
connecting one end to the riser card, connect the other end to a hard disk drive.
The primary IDE channel supports both a master and a slave IDE device but the
system housing size only permits a standard IDE hard drive to be installed.
IDE (Hard Disk Drive) Connector
13. 3.5-inch Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the riser card, connect the other end to a 3.5-inch floppy
disk drive.
Floppy Disk Drive Connector
14. LAN Activity Connectors (2-pin LAN_LED & 3-pin WOL_CON)
These connectors support Local Area Network (LAN) cards, such as the ASUS
PCI-L101, with output signals for data transfer activity. The LAN_LED con-
nector allows the front panel LED to blink during transfer activity between the
network and the computer. The WOL_CON connector allows the system to power
up when there is a wakeup package (signal) received from the network.
LAN Activity Connectors
26
III. INSTALLATION
Riser Card Front
Floppy Drive Conn.
Riser Slot
Riser Card Front
Riser Slot
ASUS SP98-N User's Manual
Primary IDE Connector
Pin 1
Orient the red stripe on the
IDE ribbon cable to Pin 1
Orient the red stripe on the
Panel Conn.
floppy ribbon cable to Pin 1
LAN activity LED
Wake on LAN activity
Pin 1