Windows Nt Server Or Workstation - Asus SP98-N User Manual

Pentium nlx motherboard

Hide thumbs Also See for SP98-N:

User manual (112 pages)

Table Of Contents

Table of Contents

VII. ASUS Network Interface

Troubleshooting

If you can't connect to a server, first try the suggestions here, then turn to the Trouble-

shooting section if necessary.

•

Make sure you're using the drivers for this interface. The driver filename contains

the letter B (for example, E100BODI.COM).

•

If you're replacing an existing adapter, make sure the LINK statement in your

NET.CFG is correct for the new interface or adapter. For example, the LINK state-

ment for a NetWare client should be: "LINK DRIVER E100BODI"

•

Verify that the frame type in your NET.CFG file matches your network.

•

If setting up a server, check your LOAD and BIND statements.

•

Test the interface by running diagnostics in Setup. Additional testing is available

by using a responder.

•

Check the README files.

Responder testing on the network (optional)

Setup can test the interface more thoroughly if you have a responder on the network

while running the tests.

1. Go to a computer on the network with any EtherExpress adapter or interface in-

stalled (except EtherExpress 32 or EtherExpress 16 MCA).

2. Run the appropriate configuration program for the installed interface and set it up

as a responder.

3. Return to the computer with the new adapter or interface. Run Setup and make the

new interface the sender. Test the interface.