Chipset Features Setup; Details Of Chipset Features Setup - Asus SP98-N User Manual

IV. BIOS SOFTWARE
Boot Up NumLock Status (On)
This field enables users to activate the Number Lock function upon system boot.
Typematic Rate Setting (Disabled)
When enabled, you can set the two typematic controls listed next. Setup default
setting is Disabled.
Typematic Rate (Chars/Sec) (6)
This field controls the speed at which the system registers repeated keystrokes. Op-
tions range from 6 to 30 characters per second. Setup default setting is 6; other
settings are 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec) (250)
This field sets the time interval for displaying the first and second characters. Four
delay rate options are available: 250, 500, 750, and 1000.

Chipset Features Setup

This "Chipset Features Setup" option controls the configuration of the board's chipset.
Control keys for this screen are the same as for the previous screen.
NOTE: SETUP Defaults are noted in parenthesis next to each function heading.

Details of Chipset Features Setup

EDO/FPM Configuration (60ns DRAM)
The default setting of 60ns DRAM automatically sets the optimal timings for items
2–7 for 60ns DRAM modules. If you are using 70ns DRAM modules, change this
item to 70ns DRAM. See section III for DRAM installation information. Disabled
allows you to configure RAS Precharge Time, RAS to CAS Delay, CAS Precharge
Time, CAS Pulse Width (Read and Write), and Refresh RAS Assertion. For DRAM
Read Leadoff Time, leave this item on its default setting of 5T.
SDRAM Configuration (12ns SDRAM): Leave on default setting.
SDRAM Read Leadoff Time (Normal): Leave on default setting.
ASUS SP98-N User's Manual 41