Fujitsu MB2146-09A-E Operation Manual page 7

5. Connections
■ Connection to the host computer
Connect the adapter to the host computer using the USB cable.
Figure 5 shows how to connect the USB cable.
■ Connection to the user system
Connect the adapter to the user system.
Plug the user interface connector of the adapter into the adapter interface connector on the user sys-
tem.
When connecting the user interface connector, align the index marks (pin 1) on each of the connec-
tors.
For the specifications of the adapter interface connector, see "■ Adapter interface specifications" in
Section 6 "Specifications".
Figure 6 shows how to connect the adapter to the user system.
Adapter
Connection to the USB
connector of the adapter
Figure 5 Connecting the USB cable
Adapter interface connector on the user system
Figure 6 Connecting to the user system
Adapter
User interface connector
Index mark (pin 1)
User system
3