Installation; Starting - LG GA-B3*9B*QA Owner's Manual

Climatic class
The appliance is designed to operate in a limited range
of ambient temperature, depend on climatic zones. You are
not allow to go for any lower, either from the top of the range.
Climatic class of your appliance marked on the Label
specification with technical description in inner side of the
refrigeration compartment.
1. Select a good location.

Installation

2. Avoid placing the unit near heat sources,
3. To ensure proper air circulation around the fridge -freezer,
4. Please, do not remove the round stickers on the back side
5. To avoid vibration, the unit must be leveled. If required, adjust
6. Before use clean your fridge-freezer thoroughly.
7. Install accessories such as ice cube box, etc., in their
8. Connect the power supply cord (or plug) to the outlet.
When your fridge-freezer is installed, allow it 2-3 hours at normal

Starting

operating temperature prior to filling it with fresh or frozen foods.
If power plug is disconnected, allow 5 minutes delay
before restarting.
Your fridge-freezer is now ready for use.
15
Climatic class
SN
N
ST
T
Place your fridge-freezer where it is easy to use.
direct sunlight or moisture.
please maintain sufficient space on both the sides as well as
top and maintain at least 2 inches (5 cm) from the rear wall.
of the refrigerator. They are performing decoration functions
by closing technological holes.
the leveling screws to compensate for the uneven floor.
The front should be slightly higher than the rear to aid in
door closing. Leveling screws can be turned easily by tipping
the cabinet slightly.
Turn the leveling screws counterclockwise (
forward part of a refrigerator, clockwise (
proper places. They are packed together to prevent
possible damage during shipment.
Don't double up with other appliances on the same outlet.
Installation
Admissible ambient
temperature
+10 С до 32 С o o
+16 С до 32 С o o
+18 С до 38 С o o
+18 С до 43 С o o
) to raise
) to lower it.