Stitch Selection - Husqvarna Viking Prelude 350 User Manual

Procedures

Stitch Selection

Your machine will sew all the stitches pictured on
the front. The stitch is set by turning the stitch
selector – the upper dial. A colored marker lines
up while turning the stitch selector, showing
which stitch is set.
Check that the needle is in its highest position
before you turn the stitch selector.
The lower dial is to ajdust the stitch length. The
stitches are divided into two groups. Forward
motion and trimotion stitches. The stitch length
for the left group, forward motion stitches, can
be varied between 0 and 6 and the width between
0-5.5.
Recommendations for the suggested stitch length
are given next to the stitches.
When you wish to use one of the stitches in the
right group, the trimotion stitches, you turn the
stitch length dial to the left until it reaches the
area . The stitch length is set for these
stitches. The stitch width can be set between 0-
5.5.
There are letters between the stitch pictures which
indicate the most suitable presser foot for each
stitch. The letter is also marked on the presser
foot.
12