Table of Contents
Advertisement
PLEASE READ CAREFULLY! Forpersonal
safety, t hisproduct m ustbeproperly g rounded.
Grounding instructions
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong grounding wall receptacle to minimize the possibility
of electric shock hazard from this appliance.
The customer
should have the wall receptacle and circuit checked by a
qualified electrician to make sure the receptacle is properly
grounded and polarized.
Preferred
Method
Grounding
Type
Wall
Receptacle
Not, Under
Any Circumstances,
Cut, Remove,
or Bypass the
g Prong.
_
Power
Supply
Cord with
3-Prong
Grounding
Plug
6.Assembly
of the Surface Burner Heads, Burner
Caps and Burner
Grates:
It is very important to make sure that all of the Surface Burner
Heads, Surface Burner Caps and Surface Burner Grates are
installed correctly.
Your appliance was shipped with the burner heads and burner
caps assembled in the correct locations (See Fig. 1).
Should you need to re-install the burner caps please refer to
the Use & Care Guide for more information.
REMEMBER--DO
NOTALLOWSPILLS,
FOOD, CLEANING
AGENTS ORANY OTH ER MATERIAL TO ENTERTHEGAS
ORiFiCE HOLDER OPENING.Always
keep the Burner Caps
and Burner Heads in place whenever the surface burners are
in use.
Burner
sizes
and cooktop
locations
Where a standard two-prong wall receptacle is encountered,
it is the personal responsibility and obligation of the customer
to have it replaced with a properly grounded three-prong wall
receptacle.
DO NOT, UNDERANY CIRCUMSTANCES, CUT OR REMOVE
THETHIRD (GROUND) PRONG FROMTHE POWERCORD.
Front of cooktop
Fig. 1
1.
2 Standard burners-
9,500 BTU.
2.
Min-2-Max
TM
- double burner - 18,000 BTU.
3.
Large burner - 14,000 BTU.
4.
Perfect Simmerburner TM-5,000 BTU.
Hide quick links:
Advertisement
Table of Contents
