Mobile Home Installation - Frigidaire GLER341CC0 Installation Instructions Manual

MOBILE HOME INSTALLATION
1. Dryer MUSTbe exhausted outside(outdoors, notbeneath
the mobile home) using metal ducting that will not support
combustion.Meta_ ducting must be 4 inches (10.16 era) in
diameter with no obstructions. Rigid metal duct is preferred.
2. If dryer is exhausted through the floor and area beneath
the mobile home is enclosed, the exhaust system MUST
terminate outside the enclosure with the termination
securely fastened to the mobile home structure.
3. When installing a gas dryer into a mobile home, a provision
must be made for outside make up air. This provision is to
be not less than twice the area of the dryer exhaust outlet.
4. This dryer MUST be fastened to the floor. Mobile Home
Installation Kit No. 169840 is available from your dealer.
5. Refer to pages 2 and 3 for other important venting
requirements.
6. Installation MUST conform to current Manufactured Home
Construction & Safety Standard (which is a Federal
Regulation Title 24 CFR-Part32-80) or when such standard
is not applicable, with American National Standard for
Mobite Homes. In Canada, the CSA Z240 is applicable.
The dryer is designed under ANSI Z 21.5.1 for
HOME USEonly._
C,
Correct
Incorrect
Correct
DON'T
O
Incorrect
0
incorrect
T L-J
33/4"
(9.5 cm)
UNDER COUNTER & STACK MODELS
ROUGH-IN DIMENSIONS
r
I
I13
ELECTRIC CONNECTION
tr-- 131/2" --_
(34.4 cm)
O
f
UNDER
COUNTER
34 5/8"
(87.9 cm)
I-
3/8" (0.96 cm) DIA. I
GAS PIPE 1"(2.54 cm)
REAR VIEW
36 _
(91.5 cm)
DOOR OPEN 900
Lid
47 112"
(I 20.7 cm)
43/8"
(I 1.1 cm)
I
OPTIONAL
VENT KNOCKOUT---.,_, ,--
27"
(68.6 cm)
SIDE VIEW
3 3/4 _
(9.5 cm)