Determining Wall Plate Location - GE JVM1665 Installation Instructions Manual

Installation instructions
| DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
Plate position - beneath framed recessed
cabinet bottom
Mounting Plate Tabs
theCabinet
Bottom
At least 30", up to 36"
Mounting Plate Tabs
Touching theBack
'-. Frame
s
"...
30" to Cool<top
Plate position - beneath recessed bottom
cabinet with front overhang
Mounting Platewith
TabsBelow Cabinet
Bottomthe Same
Distanceasthe Front
OverhangDepth
\
30" to Cool<top
Your cobinets mog hove decorotive trim thot interferes
with the oven instollotion. Remove the decorotive trim
to instoll the oven properly ond to moke it level.
THE OVEN MUSTBE LEVEL.
Use o level to moke sure the cobinet bottom is level.
If the cobinets hove o front overhong onlg, with no
bock or side frome, instoll the mounting plote down
the some distonce os the front overhong depth.
This will keep the oven level.
[] Heosure the inside depth of the front overhong.
[_ Drow o horizontol line on the bock woll on equol
distonce below the cobinet bottom os the inside
depth of the front overhong.
[_ For this type of instollotion with front overhong only,
olign the mounting tobs with this horizontol line, not
touching the cobinet bottom os described in Step D.
9