Determining Wall Plate Location - GE JVM1490 Installation Instructions Manual

Installation Instructions
[] DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
Plate position - beneath framed recessed
cabinet bottom
Maunth_g PI_teTabs
Moum:ing PlateTabs
Teuchi_gthe Back
Frame
Plate position - beneath recessed bottom
cabinet with front overhang
II
30" to Cooktap
S%ur cabinets may have decorative trim that intertcres
with d_e oven inst_dlation. Remove the decorative n'im
to install the oven properI_ and to make it level.
THE OVEN MUST BE LEVEL.
Use a l_'eI to make sure the cabinet bottom is level.
If' the cabinets have a lyon t overhang only, Mth no
back or side &ame, install the moundng plate down
the same distance as the &ont ore€hang depth. This
will keep the oven level.
[] Measure the inside depth of the fl'ont overhang.
[] Draw a horizontal line on Ihe t_ck _vall
eqt_]
all
distal_ce below the c_binet bottom ;_ the inside
depth of the fi'ont ove_:hal_g.
[] For I}fis t}_e of inst_dlation with front
overhal]g
onl}_
align Ihe moundng u4bs with Ih:is horizonud line, not
touching the cabinet tx_ttom as descrit_d in Step D.
9