FLIR PathFindIR User Manual page 27

connections should be made to the fused side of the vehicle's power
distribution block.
Do not install in areas where the unit will hinder vehicle operation, i.e. radiator,
steering, headlights, braking systems. Doing so may interfere with the vehicle's
operation and cause an accident.
Do not install in areas of high moisture, dust or air intake paths. Doing so may
hinder the performance of the PathFindIR unit and cause image degradation
or window damage.
Use only authorized parts and accessories. Doing so helps assure proper
mounting and connectivity and limits external issues associated with poorly
secured mounting and wiring.
Disconnect the negative (-) battery terminal prior to installation.
Connect the unit to the vehicle power distribution block using an available fused
(2 amp) connection. Be sure to connect each lead to the correct polarity (red-
positive and black-negative).
Caution!
The PathFindIR system is designed for the automotive 12 VDC power
environment and conforms to ISO 7637-2 requirements for transients and
disturbances on the typical automotive power system. If the PathFindIR system
is installed in applications other than commercial automobiles, additional
power conditioning or protection may be required.
Be sure to securely mount the system to assure reliable connections and
stable system performance.
Record the serial number, date of purchase, location of purchase and keep this
record in a safe place.
Do not mount a display monitor where it will distract the driver or adversely
affect the driver's vision.
334-0001-00-10, version 130
6 – Installation
23