Physical Details - Planet IVS-110 User Manual

2.2 Physical Details

Identification of IVS-110 cables
Front Panel
LAN Socket The LAN socket is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built
N-Way protocol can detect or negotiate the transmission speed of the
network automatically. Please use Category 5 "straight through" cable to
connect the IVS-110 to a 100Mbps Fast Ethernet network switch or hub.
The LAN socket is compliant with IEEE802.3af standard PoE interface.
NOTE: If you need to connect the IVS-110 to PC or notebook directly, you
should use cross over cable instead.
Video-in Jack You can install an analog camera and connect it to video-in jack.
12V DC-Out Jack The output power is 12V DC. This is used to supply 12V DC power to one
external camera. The output power is 12V DC, 400mA maximum.
DI/DO/RS-485 The IVS-110 provides a terminal block with 6 pins of connectors for DI/DO
Connector and RS-485 interface. Please refer to the section 3.6.1 and Appendix B in
manual for more information.
8