Network - Planet IVS-110 User Manual

1- channel video server

Hide thumbs Also See for IVS-110:

Table of Contents

3.5 Network

Use this menu to configure the network to connect the device and the clients.

3.5.1 Network

This section provides the menu of connecting the device through Ethernet cable.

MAC Address

Display the Ethernet MAC address of the device. Note that user cannot

change it.

Obtain an IP

DHCP: Stands for Dynamic Host Configuration Protocol. Enable this

address

checked box when a DHCP server is installed on the network to issue IP

automatically

address assignment. With this setting, the IP address is assigned

(DHCP)

automatically. If this device cannot get an IP address within limited tries, the

device will assign a default IP address, 192.168.0.20, by itself as the default

IP address.

IP address, Subnet

If you do not select Obtain an IP address automatically, then you need to

mask, Gateway,

enter these network parameters by yourself.

1st DNS, 2nd DNS

server

IP Address

This address is a unique numbers that identifies a computer or device on

the WAN or LAN. These numbers are usually shown in groups separated by

periods, for example: 192.168.0.200

Table of Contents