Table of Contents
Advertisement
DataPocket
User's Guide
Once connected, your computer will automatically recognize** DataPocket and
display it as a Hard Disk Drive on your computer.
After DataPocket is recognized by your computer, you can use it just as you would use your
computer's internal hard drive.
Note: The drive letter for DataPocket may vary depending on your computer configuration.
** For Windows 98/SE, a device driver must be installed before the computer can recognize
DataPocket. See Section 5. Installing Windows 98 Driver for instructions.
2.4. Safely Removing DataPocket from Your Computer
To properly remove DataPocket from your computer, disable the device before
unplugging it from your computer.
Warning: Unplugging DataPocket before properly disabling the device increases the risk of
disrupting data transmission between DataPocket and your computer. This may crash your computer
and cause data loss.
The method to disable DataPocket will vary based on the operating system of your
computer. Refer to the instruction manual of your computer for details on how to do
this.
Page 4
Revision 1.3
Advertisement
Table of Contents
