Connecting Datapocket To Your Computer - Digital Foci DataPocket User Manual

DataPocket
User's Guide

2.3. Connecting DataPocket to Your Computer

DataPocket is powered via your computer USB Port and does not require external
power.*
Use the USB cable included with your DataPocket to connect DataPocket to your
computer. This is a special USB cable that has a Power Only USB connector. Under
normal circumstances you will not need to use this additional USB connector.
To connect DataPocket to your computer, plug in the USB connectors in the
following order:
1) Plug the Main USB connector to a free USB Port on your computer.
2) Plug the Mini-USB connector to the USB Port on DataPocket.
Mini-USB
Power Only USB
Main USB
(To DataPocket)
(To Computer)
(To Computer)
* In some special cases, your computer USB Port may not be able to provide sufficient power for
DataPocket to function properly. See Section 4. Powering DataPocket for more details about this
condition.
Page 3
Revision 1.3