Installing Windows 98 Driver - Digital Foci DataPocket User Manual

5. Installing Windows 98 Driver

Driver installation is required for computers running on Windows 98/SE. To install
the DataPocket driver for Windows 98 follow these steps:
1. Close all programs running on your computer.
2. Insert DataPocket Resource Disc into your computer CD-ROM drive.
3. Double-click on My Computer and locate the 'Win98' folder on the Resource
Disc.
4. From within the 'Win98' folder, double-click on 'Setup.exe' to begin driver
installation.
5. Follow the installation instructions on the Install Wizard screens.
6. After the Install Wizard has finished, restart your computer to complete the
installation.
Once your computer has restarted, connect DataPocket to your computer. Your
7.
computer will recognize DataPocket as a Hard Disk Drive and create an icon for
it in Windows Explorer.
Note: The drive letter is automatically assigned and may vary depending on your computer
configuration.
8. Now your Windows 98/SE computer is ready to install DataPocket Smart
Backup Utility. See Section 3.1. Installing DataPocket Smart Backup Utility for
instructions.
Revision 1.3
DataPocket
User's Guide
Page 18