Install The Range - GE JDS28 Installation Instructions Manual

Installation Instructions
INSTALL THE RANGE
Ill iNSTALLiNG THE ANTI-TIP
BRACKET
The anti-tip bracket is attached to the back of
the Drop-In Range. It is designed to fit under
the bottom of the countertop opening at the
rear. Measure counter thickness at back of
cutout to determine correct bracket location.
ANTI-TIP INSTALLATION
Select the proper position for the countertop
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1.)
C) For 3/4" Counter (_) For 3.5"
(_) For 1.18" (3 cm) Counter (_ Alternate
(_ For 1.5" Counter (shown below)
Cooktop ___
Anti-tip bracket location
(rear of range)
_>----- o o
(_--o o
Interior wall -_
1/4" min. flat area ____.
Maintop
\
Anti-tip
bracket
Bottom of
countertop
to engage
bracket by
1/2" min.
_Wall stud
Countertop
thickness
f
Bottom of
-countertop
Wire cover
_L Y
Y
ALTERNATE
ANTI-TIP INSTALLATION
Interior wall
Non-kit application
Maintop
Attachment
Position #5
non-kit
application
Anti-tip bracket
_WaN stud
Countertop
surface
10-3/8"
Wire I
cover
1-1/2"
_ Attachment
anchored to
wall stud is
required
*Attachment
to engage
bracket by 1/2"min.
9