GE JDS28 Installation Instructions Manual page 11

Installation Instructions
[] CHECK FOR PROPER
INSTALLATION OF THE
STOP SCREW
Look at both sides of the range under the door.
The stop screws must be located in the notch
on the sides of the range, and not touch the
top of the notch when the range is fully seated
on the countertop. If the screws do not meet
the requirements, move the screws to a
position that meets these requirements.
(See illustration below.)
_- Side
trim
Notch in bottom
of side trim
Shoulder
screw
[] ATTACH THE LOWER TRIM
Attach the lower trim (supplied separately with
the range) to the bottom of the vertical side
trim with the 2 screws supplied.
Lower
left
corner
tri_
End flange
& tab on
lower trim
fits inside
side trim
Top flange
1/2" wide
11