Prepare To Install The Range - GE JCAS745 Owner's Manual And Installation Instructions

PREPARE TO INSTALL THE RANGE

TOOLS YOU WILL NEED
Drili with 1/8" Bit
Adjustable Wrench
Pliers
1/4" Nut Driver
Phillips Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
1 REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure
to remove packaging materials could
result in damage to the appliance.
32
Installation Instructions
Safety Glasses
Tape Measure
Pencil
Level
Flat-blade
Screwdriver
32
2 PREPARE THE OPENING
Allow 2" spacing from the range to adjacent

vertical walls above the cooktop surface. Allow
30" minimum clearance between the surface
units and the bottom of unprotected wood or
metal top cabinet, and 18" minimum between the
countertop and the adjacent cabinet bottom.

over hot surface elements, cabinet storage space
above the cooktop should be avoided. If cabinet
storage space is to be provided above cooktop,
the risk can be reduced by installing a range hood
that protrudes at least 5" beyond the front of the
cabinets. Cabinets installed above a cooktop may
be no deeper than 13".
Models A B
JCAS745
JCAP750
47" 24
3/8
JCAP760
JCAP765
JCAS445 36" 24
3/8
Flooring under the range
Your range, like many other household items,
such as cushioned vinyl or carpeting.
it should be installed on a 1/4" thick sheet of
plywood (or similar material) as follows:
the range, the area that the range will rest on
should be built up with plywood to the same
allow the range to be moved for cleaning or
servicing.
C
D
(recommended)
2" (5,08 cm) 41" (104,14 cm)
N/A
41" (104,14 cm)