1/4"Thick Custom Panels Or Panels Secured To 1/4"Thick Backing - GE ZIC36N RH Manual And Installation Instructions

Custom Panel Dimensions
36" Bottom Mount ReJi_igerators
CustomDoorPanel DimensionsUsingStandardTrim
1/4" thick panels
or
Panels secured to 1/4" thick backing
@ 35-1/16 _
Fresh Food Panel 45 1/2"
+
Freezer Panel
35 1/8"
21 11/16"
¢
ZIC36N Bottom Mount Refrigerator
• 1/4" Panels:Cut panels to size
• Custom handles with 1/4 door panels require Trim kits
ZKHC1or ZKHCSSl for tubular stainless steel handles
Standard Trim with Panels secured
to 1/4" thick backing
• Applying a raised panel design to a 1/4"thick backing
(screws or glued): Cut 1/4" thick panels to size On the
fresh food door, fabricate the raised panel to permit at
least 2, fingertip clearance of the standard handle 1-
1/4 clearance from the hinge side to avoid striking
adjacent cabinetry and 5/16 from the top and bottom
edges to allow for the trim flange For the freezer
drawer, allow 2"clearance at the top handle end and
5/16 clearance on both sides and the bottom edge to
allow for trim flange
Note: ZKHTCl custom handle kit cannot be used in
this configuration
Custom Grille Panel
35 1/8"
8" 1/4" Thick Panel
The grille panel frame is factory assembled for 84"
installation height If installation height varies, order
ZGC2trim kit that provides optional side trim pieces
Cut grille panel to sizes shown below
1/4"-
Thick
Backing
Raised Panel on 1/4" Thick Backing
Using Standard Handles
-Appearance
Panel
2anC/_a r_i_tCee2_
5/16" Clearance
Fresh Food Panel
5/16" Clearance •
1-1/4"
Clearance
hinge side
Installation Height Panel Height
83-1/2' 7-1/2"
84-1/2" 8-1/2"
2" Clearance
Handle End
Freezer Panel
8/16" Clearance
5/16" Clearance