GE PDWT380R10SS Installation Instructions Manual page 10

Dishwasher Installation
STEP 11 - INSERT DRAIN HOSE
THROUGH CABINET
• Position dishwasher in front of cabinet opening. Insert drain
hose into the hole in cabinet side. If a power cord is used,
guide the end through a separate hole.
Drain
Hose Length 10'
Blanket
Hose
/
House Wiring
(If Power Cord
is NOT Used)
Power Cord
(If Used)
Figure R
Tip: Position water line and house wiring on the floor to avoid
interference with base of dishwasher.
STEP 12 - SLIDE DISHWASHER THREE-
FOURTHS OF THE WAY INTO
CABINET
IM _UK i_l_l|- DO NOT PUSH AGAINST FRONT PANEL
WITH KNEES.DAMAGE WILL OCCUR.
', Grasp the dishwasher bg its sides and slide it into the opening
a few inches at a time.
o Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure S
• As gou proceed, pull the drain hose through the opening
under the sink. Stop pushing when the front of the
dishwasher is a few inches forward of adjacent cabinets.
• Make sure drain hose is not kinked under the dishwasher
and there is no interference with the water line, wiring or ang
other component.
Tip: Make sure the dishwasher will fit in the cabinet. Check to
be sure the power cable, drain hose and hot water line are not
trapped behind the dishwasher. Utilitg lines trapped behind the
dishwasher prevent the dishwasher from being pushed fullg
into the enclosure.
lO