Tools Needed; Materials Needed - Bosch SRV53C03UC-30 Installation Instructions Manual

,,,-,
TOOLS NEEDED
Tools and Materials Needed
Hammer Hole Saw
Pipe Wrench Adjustable Wrench
Tape Measure
Slot Screwdriver
Phillips Screwdriver
T-20 Screwdriver
Wire Cutter Wire Stripper
Drill
Level
...... J
MATERIALS NEEDED
(Additional materials may be required to comply with local codes.)
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper
conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8" O.D.copper tubing or metal braided dishwasher
supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
Teflon brand tape or other pipe thread compound to seal plumbing connections,
UL listed conduit connector or strain relief. Although a strain relief is included on the
junction box, a separate strain relief may be required if you attach the field wiring
directly to the terminal btock.