Bosch NGM Installation Manual page 9

Burner Base
,Matching letter
"- designation.
Burner Cap
Checking Burner Cap Placement
Check to make sure there is not gap between the
burner cap and burner base. See figure "Burner Cap
Placement" on page 7 to see the correct and incorrect
placements of the burner cap.
Figure 9: Burners Caps
You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Correct Burner Cap Placement Incorrect Burner Cap Placement
Figure 10: Burner Cap Placement
English 7