Asus CUSL-L 815 microATX User Manual page 25

3. HARDWARE SETUP
14) Wake-On-LAN Connector (3-pin WOL_CON)
This connector links a LAN card with a Wake-On-LAN output. The connector
powers up the system when a wakeup signal is received through the LAN card.
CUSL-L
CUSL-L Wake-On-LAN Connector
15) LCD-TV Headers (20-pin, 20-1 pin LCDTV)
These headers require an optional LCD module for LCD output or a TV-out
module for TV output.
CUSL-L
CUSL-L LCD-TV Headers
16) CPU Thermal Sensor Connector (3-pin CPUT)
This connector requires a thermal sensor device to be attached to the surface of
the CPU for thermal monitoring and response.
CUSL-L
CUSL-L Thermal Sensor Connector
24
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
WOL_CON
+5 Volt Standby PME
LCDTV
CPUT
CUSL-L User's Manual
Ground
1