Memory Installation - Asus CUSL-L 815 microATX User Manual

Intel 815 microatx motherboard
Table of Contents

Advertisement

3. HARDWARE SETUP

3.4.2 Memory Installation

WARNING!
Make sure that you unplug your power supply when adding or
removing memory modules or other system components. Failure to do so may
cause severe damage to both your motherboard and expansion cards (see 3.3
Hardware Setup Procedure for more information).
Insert the module(s) as shown. Because the number of pins are different on either
side of the breaks, the module will only fit in the orientation shown. DRAM SIMM
modules have the same pin contacts on both sides. SDRAM DIMMs have different
pin contacts on each side and therefore have a higher pin density.
CUSL-L
CUSL-L 168-Pin DIMM Sockets
The DIMMs must be 3.3Volt unbuffered SDRAMs. To determine the DIMM type,
check the notches on the DIMMs (see figure below).
The notches on the DIMM will shift between left, center, or right to identify the type
and also to prevent the wrong type from being inserted into the DIMM slot on the
motherboard. You must tell your retailer the correct DIMM type before purchasing.
This motherboard supports four clock signals per DIMM.
14
CUSL-L User's Manual
Lock
88 Pins
60 Pins
20 Pins

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cusl-l

Table of Contents