Indicators On Lcd; How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation - Midea CR034-RG36F Remote Control Manual

Indicators on LCD

Transmission Indicator
This transmission indicator lights when remote
control transmits signals to the indoor unit.
Mode display
Displays the current operation mode, including
AUTO (
(not applicable to cooling only models), FAN (
and back to AUTO (
Temperature/Timer display
Displays the temperature setting (17 C ~ 30 C).
auto cool dry heat fan
When you set the operating mode to FAN, no
temperature setting is displayed. In the TIMER mode
the ON or OFF settings of the TIMER are displayed.
SET TEMP. TIMER ONOFF
Fan speed display
Displays the selected fan speed, AUTO (no display)
and three fan speed levels " " (LOW) "
" " (HIGH) can be indicated. The fan speed is
AUTO when the operating mode is AUTO or DRY.
silence sleep follow me lock run
Displayed by pressing the ON/OFF button. Press
the ON/OFF button again to remove displayed icon.
F
F
Displayed when LOCK mode is activated.
Displayed when FOLLOW ME function is activated.
Sleep Display
Displayed under sleeping operation. Press the
SLEEP button again to remove displayed icon.
Displayed when SILENCE function is activated.
NOTE
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
), COOL ( ), DRY ( ), HEAT (
).
O O
" (MED)
ON/OFF display
Lock Display
FOLLOW ME Display
Silence Display
7
)
2 ON/OFF
) TEMP
1
MODE SILENCE
FP
FAN
SPEED
SWING
TIMER
SWING ON/OFF
SLEEP
INTELLIGENT
FRESH EYE
TURBO
LED
SELF FOLLOW
CLEAN
ME
LOCK RESET
2
ON/OFF
TEMP
1
MODE SILENCE
FP
FAN
SPEED
SWING
TIMER
SWING ON/OFF
SLEEP
INTELLIGENT
FRESH EYE
TURBO
LED
SELF FOLLOW
CLEAN
ME
LOCK RESET

How to use the Buttons

Auto Operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
3
1. Press the MODE button to select AUTO.
2. Press the UP/DOWN button to set the
2
desired temperature. The temperature can
O
be set within a range of 17 C ~ 30 C in 1 C
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
1. In the AUTO mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote control.
2. In the AUTO mode, you can not switch the fan
speed. It has already been automatically controlled.
3. If the AUTO mode is not comfortable for you, the
desired mode can be selected manually.

Cooling/Heating/Fan Operation

Ensure the unit is plugged in and power is
available.
4 1. Press the MODE button to select COOL,
HEAT or FAN mode.
2
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
O
be set within a range of 17 C ~ 30 C in 1 C
increments.
3. Press the FAN SPEED button to select the
3
fan speed in four steps: AUTO, LOW, MED,
or HIGH.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In FAN mode, the set temperature is not displayed
in the remote control and it is not possible to control
the room temperature. In this case, only steps 1, 3
and 4 may be performed.
8
O O
O O