Midea CR034-RG36F Remote Control Manual page 4

Function Buttons
RESET Button
7
When you press the recessed RESET button,
all current settings are cancelled and the
control will return to the initial settings.
UP Button (
8
Push this button to increase temperature
settings or to increase Hour for Timer setting.
1
9 DOWN Button (
8
ON/OFF Push this button to decrease temperature
9 setting or to decrease Hour for Timer setting.
TEMP
10 SILENCE/FP (8 C Heating) Button
2
MODE SILENCE 10
Press to activate/disable SILENCE function.
FP
When the Silence function is activated, the
FAN
3
SPEED indoor unit will bring faint breeze, which
SWING
11
reduces noise to the lowest level and creates
12
4 TIMER
a quiet and comfortable environment.
SWING
ON/OFF
During heating operation (when the setting
13 mode is HEAT), by pressing this button for
SLEEP
INTELLIGENT
5
FRESH EYE
more than 2 seconds, the FP (8 C Heating)
function is activated. The unit will operate at
TURBO LED
14
6 SELF
FOLLOW
CLEAN ME
a set temperature of 8
7
indoor unit will display 'FP'. Pressing the
RESET
LOCK
15
buttons ON/OFF, SLEEP, FP, MODE, FAN
SPEED, UP or DOWN while operating will
cancel the FP (8 C Heating) function.
FAN SPEED Button
11
Used to select the fan speed in four steps:
AUTO
12
TIMER ON/OFF Button
Press this button to initiate the Auto-On /
Auto-Off time sequence. Each press will
increase the auto-timer setting by 30
minutes increments. When the setting
time displays 10H, each press will increase
the auto-timer setting by 60 minute
increments. To cancel the auto-timer
program, simply adjust the auto-on timer
to 0:0.
+
)
-
)
O
O
O The LED display of
C.
O
LOW MED HIGH
5
INTELLIGENT EYE Button
13
Press this button to initiate the INTELLIGENT
EYE Function. With the built-in infrared
sensor, the unit can detect the presence of
human in the room. If the unit detects no
human activity continuously for 30 minutes,
it will automatically enter standby (monitor)
1
status in order to save power consumption.
8
ON/OFF
The unit will automatically start and resume
9
operation when human activity is sensed
TEMP
again.
2
MODE
SILENCE 10
LED/FOLLOW ME Button
FP 14
Press to disable/activate indoor LED display.
FAN
3
When button is pressed for more than 2
SPEED
SWING 11
seconds, the 'FOLLOW ME' function will be
activated. Press again for more than 2
12
4 TIMER
SWING ON/OFF
seconds again to disable the function.
SLEEP 13
INTELLIGENT
5
LOCK Button
FRESH EYE 15
When you press the recessed LOCK button,
TURBO
LED
all current settings will be locked in and the
14
6 SELF FOLLOW
CLEAN
ME
remote control will not accept any operation
7
except that of the LOCK. Press the recessed
LOCK RESET
15
LOCK button again to cancel the LOCK mode.
6