Table of Contents
Advertisement
Remote Control Specifications
Model
RG36F3/BG(C)EF
3.0V (Dry batteries R03/LR03 X 2)
Rated Voltage
Signal Receiving
8m (when using 3.0 voltage, up to 11m)
Range
Environment
-5 C ~ 60 C
O
O
Performance Feature
1. Operating Mode: AUTO, COOL, DRY, HEAT, and FAN.
2. Timer Setting Function within 24 hours.
3. Indoor Setting Temperature Range: 17 C ~ 30 C
4. Full function of LCD (Liquid Crystal Display).
NOTE
Function button designs illustrated may differ slightly from the model you
actually purchased, depending on individual models.
All the functions described are accomplished by the indoor unit, but if your
particular unit does not have a particular feature, there will be no
corresponding operation when relative button on the remote control is
pressed.
O
O
3
Function Buttons
ON/OFF Button
1
Operation starts when this button is pressed
and stops when this button is pressed again.
MODE Button
2
Each time the button is pressed, the operation
mode is selected in a sequence of following:
NOTE: Heat mode is for Cooling & Heating models only.
1
8
ON/OFF
3
Swing
9
TEMP
Used to stop or start horizontal louver
movement or set the desired up/down air flow
2
direction. The louver changes 6 degrees in
MODE
SILENCE
10
FP
angle with each press. If pressed for more
than 2 seconds, the louver will swing up and
FAN
3
SPEED
SWING
11
down automatically.
Swing
4
12
4
TIMER
SWING
ON/OFF
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
13
SLEEP
The vertical louver changes 6 degrees in angle
INTELLIGENT
5
FRESH
EYE
with each press and the temperature display
area of indoor unit displays
TURBO
LED
14
6
SELF
FOLLOW
CLEAN
ME
second. If pressed for more than 2 seconds,
7
the vertical louver swing feature is activated
LOCK
RESET
and the display area of indoor unit displays 'IIII'
15
flashes four times, then the temperature
setting reverts back. If the vertical louver
swing feature is stopped, it displays 'LC' and
remains on for 3 seconds.
SLEEP/FRESH Button
5
Press to activate/disable SLEEP function. If
pressed for more than 2 seconds the FRESH
function will be activated. Pressing once
again for more than 2 seconds will disable
the FRESH function.
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if the MODE, FAN
SPEED or ON/OFF button is pressed.
TURBO/SELF CLEAN Button
6
Press to activate/disable TURBO function. If
pressed for more than 2 seconds, the SELF
CLEAN function will be activated. Pressing
again for more than 2 seconds will disable
the SELF CLEAN function.
AUTO
COOL
DRY
HEAT
FAN
Button
Button
, ,
for one
4
Hide quick links:
Advertisement
Table of Contents
