Pc Setup - Haier 42EP24STV Owner's Manual

How to connect
1.
To get the best picture quality, adjust the PC
graphics card, if necessary.
2.
Use the TV `s VGA IN or DVI (Digital Visual
Interface) IN port for video connections, depending
on your PC connector.
If the graphic card on the PC does not output
analog or digital RGB simultaneously, connect
only one of either VGA IN or DVI IN to display the PC
on the TV .
If the graphic card on the PC does output analog
and digital RGB simultaneously, set the display to
either VGA or DVI; (the other mode is set to Plug
and Play automatically by the display.)
3
. Then, make the corresponding audio connection. If
using a sound card, adjust the PC sound as required.
How to use
1
. Turn on the PC and the
2. Turn on the display by pressing the POWER button on the
3. Use INPUT on the remote control to select VGA, or DVI source.
4. Check the image on your
brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate
or adjust the brightness and contrast on MENU until the picture is clear. If the refresh rate of the PC graphic card can not
be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
NOTES:
Use a DVI cable.
Avoid keeping a fixed image on the
permanently imprinted on the screen. Use a screen saver when possible.
The synchronization input form Horizontal and Vertical frequencies are separate.
TV.
TV . There may be noise associated with the resolution, vertical pattern, contrast or
TV 's screen for a long period of The fixed image may become
TV 's remote control.
Owner s Manual 13