RISK ELECTRIC SHOOK WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire.
IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed. 3)Cleaning --- Unplug from the wall outlet before cleaning.
SAVE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
Contents War nin g ..........Saf ety I nst ruc tio ns ....... Introduction Con tro ls .
-This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front panel controls 42EP25BAT 42HP25BAT EXIT INPUT 50HP25BAT 6 PLASMA TV 42EP25SAT 42HP25SAT EXIT INPUT VOL- VOL+ MENU VOL- VOL+ MENU .VIDEO input .L-AUDIO-R left and right audio input.
PC VIDEO Input Connect the monitor output connector from a PC to the jack DVD/DTV Input (Component ) Connect a component video/audio device to these jacks. 42EP25SAT 42HP25SAT S-Video Input Connect S-Video out from an S-VIDEO device to the S-VIDEO input. YPbPr...
Universal Remote Controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction POWER Turns your TV or any other programmed equipment on or off, depending on mode.
FAV.LIST AUDIO LIST SWAP AUDIO SWAP POSITION P.MODE S.MODE FREEZE VOL+ VOL- Q.VIEW Remote controller 42HP25SAT 42EP25SAT Power cable Speaker unit(X2) Screws Brace pole x2 PLASMA TV OWNER S MANUAL Power cable Owner`s manual Connection cord Standx1 Alkaline battery(AAA) 2...
Release the speaker terminal and ensure that the white connecting cable is inserted in the terminal slot marked red and black connecting cable is inserted in the black terminal slot, and that anode and cathode poles are correctly connected. (See Figure ) 10 PLASMA TV 42EP25SAT/42HP25SAT \U+2592\U+255A\U+2514\U+00B2 25.400 25.400...
Install the Stand Insert the supporting bracket with 8 M4x12 screws to the installation holes on the bottom of the soleplate. Fasten the Supporting bracket and the Soleplate as shown in figure. Install the Stand to the PDP Face the PDP screen upside down on a clean blanket or the bracket and pay attention not to indent the casing. Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP .
- The TV can be installed in various ways such as on a wall, or on a desktop etc. - The TV is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock.
External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV.
External Equipment Connections External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
External Equipment Connections DTV connection - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
External Equipment Connections PC connection How to connect . To get the best picture quality, adjust the PC graphics card to (1024 . Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherVGA display the PC on the TV.
Installation External Equipment Connections Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV`s AV OUT. See the Operating Manual of the second TV or monitor for further AUDIO OUT INPUT details regarding that device`s input settings.
Installation HDMI - HDMI , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing." - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolution. - When you connect this TV with a source device(DVD player, Set Top Box or PC) supporting Auto HDMI/DVI function, the output resolution of the source device will be automatically set to 1280x720p.
Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) Owner s Manual 19...
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. YPbPr Headphone S-VIDEO Audio In Power source AC Outlet Wider Hole and Blade Polarized AC Cord Plug...
Operation -In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow.
Channel menu This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.
Channel menu Manual Scan If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Press the MENU button and then use Channel menu. Press the button and then use Press the button and then use mode.
Channel menu Edit Program You can create your own Favorite List. Use the FAV.LiST butt on on the remote control when a channel is highlighted and then you can add or delete the channel to/from the Favorite List. You can skip some channel; You can lock some channel;...
Select the desired program Using the CH+/- buttons. Press the CH+ button to select a channel number in number increasing direction. Press the CH- button to select a channel number in number decreasing direction. (Note: If Skip is ON on one channel, press CH+/- button, the channel will not appear.) Select the desired sound Press the VOL-/+ or buttons on the remote or the front of the TV set to adjust the volume level.
Video menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. How to select picture modes The picture mode provides the pre-defined images settings. There are four settings: standard/ vivid Press P.MODE button on the remote controller the Video Mode list is out , press P.MODE to select the option (Standard/Vivid/Mild/Custom) Standard:...
Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. - Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible. Press the ARC button the Aspect Ratio menu appearance on the screen.
Audio menu How to Select Audio modes Press S.MODE button on the remote controller the Audio Mode list is out , press S.MODE to select the option (Live/POP/Rock/Custom). Custom A spare setting that can be adjusted to personal tastes. Live Normal sound with moderate bass and treble setting.
Operation Audio menu SAP Broadcasts Setup - This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. - When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals.
Time menu Date /Time setting Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. Press the MENU button and then use Press the button and then use Press the button and then use...
Time menu Sleep Timer setting The sleep timer automatically shuts off the TV after a preset time (from 15 to 120 minutes). Press the MENU button and then use Press the button and then use Press the button and then use Select 0Min, 15Min, 30Min, 60Min, 90Min, 120Min.
Function menu Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs.
DTV Caption Style ( This allows you to modify how digital captions are displayed on your TV. Select from the following options to change the visual characteristics of your TV`s digital captioning. - Customize the DTV/CADTV captions that appear on your screen. 1.
Adjust menu Screen Setup for PC mode - When RGB connect to PC input and select the VGA, this function is used. Adjustment for screen Position, Size, Phase, Reset - Display PC Adjust Menu by pressing INPUT button then use Position : Adjust the screen position.
Lock Menu Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories.
Lock setup - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu. Press the MENU button and then use Then, press the button. The TV is set up with the initial password security default password is 9-4-4-3.
Lock setup Parental Guide Parental Guide : Blocks any channels that you do not want to watch or that you do not want your children to watch. Note : The Parental control will automatically block certain categories that are more restrictive . For example, if you block TV-Y7 will automatically be blocked.
EPG (Electronic Program Guide) - This system has an Electronic Program Guide (EPG) to help your navigation through all the possible viewing options. - The EPG supplies information such as program listings, start and end times for all available services. - This function can be used only when the EPG information is broadcasted by broadcasting companies.
Brief Info. - Brief Info shows the present screen information. - Press the INFO button to show the Brief Info on the screen. - Press the INFO button or EXIT button to exit. Function: Show the present screen information. Press the INFO button or EXIT button to exit. A: Program title Program rating categories...
Viewing Picture - in- Picture This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. - The PIP function is be used only in DTV and VIDEO1 modes.
Setting Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, VCR, CABLE, DVD, SETBOX or AUDIO Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
Setting Up Your Remote Control SELECT CH.LIST FAV.LIST AUDIO LIST SWAP AUDIO SWAP POSITION P.MODE S.MODE FREEZE VOL+ VOL- Q.VIEW 42 PLASMA TV Code Display Mode Press and release SELECT button to desired device. Press and hold OK button, then press SELECT button about 3 seconds till LED is on.
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen .
External Antenna Impedance Dimensen(WXHXD) Unit::inches/mm (Including stand) The specifications shown above may be changed without prior notice for quality improvement. 48 PLASMA TV 42EP25 AT/42EP25SAT 1024X768(Dot) NTSC 42EP25 AT 42EP25SAT 41.3X26.2X10.6inches 41.3X26.2X10.6inches 1050X664X270 mm 1050X664X270 mm 60.6/27.5 42HP25 AT/42HP25SAT/50HP25 AT...
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Blank screen No sound Poor sound No picture in some...
Haier. The warranties described herein shall be the sole and exclusive warranties granted by Haier and shall be the sole and exclusive remedy available to the purchaser. Correction of defects in the manner and for the period of time described herein, shall constitute...