Download Print this page

Advertisement

PLASMA MONITOR

Advertisement

   Also See for HAIER 42EP24S

   Related Manuals for HAIER 42EP24S

   Summary of Contents for HAIER 42EP24S

  • Page 1

    PLASMA MONITOR...

  • Page 2: Warning

    LITERATURE ACCOMPANYING THE APPLIANCE. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 3: Safety Instructions

    8)Power Source ---this monitor should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

  • Page 4

    Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. e.If the unit has been dropped or damaged in any way.

  • Page 5: Table Of Contents

    External A/V Source Setup......Product Specifications......... 31 DVD Setup..........DTV Setup/Monitor Out Setup....... PC Setup............ Install the Speakers........Install the Stand........... Install the Stand to the PDP......Operation Turning the Monitor On......... Basic Function Saving Mode..........Operation Menu........Sound Mode..........

  • Page 6: Instruction Controls

    Power On/Off Button Signal source input option Power Standby Indicator illuminates red in standby mode,illuminates blue when the display is turned on Down/Up. Sel ct desired option on the menu Remote Control Sensor VOLUME Buttons MENU Button 6 Plasma Monitor...

  • Page 7: Connection Options

    External audio/ AUDIO output video output Power Cord Socket This monitor operates on AC power.The voltage is indicated on the specifications page. Never attempt to operate the monitor on DC power Owner s Manual 7...

  • Page 8: Remote Control Key Functions

    When using the remote control. Aim it towards the remote sensor on the monitor. VIDEO INPUT Select AV/S-Video source Selects:AV1/S-Video/YPbPr/YCbCr/VGA/ DVI input source POWER Select PC source Turn your monitor on VIDEO INPUT POWER AUTO Auto adjust for PC DISPLAY...

  • Page 9: Installation Installation Instructions

    P.STD VOL+ LOCK CALENDAR VOL- S.STD SAVING SURROUND RATING SLEEP FREEZE (2.5MX2) Connection cord Speaker unit(X2) Assembly instruction 3 M5X16 Screws 1 M4X12 Screws 2 M4X8 Screws Stand 6 brace pole x2 7 PMMA baffle x1 Owner s Manual 9...

  • Page 10: Vcr Setup/cable Tv Setup

    Do not leave a still picture from a VCR on the screen for a long time. Ifthe 4:3 format is used, the fixed images on the sides of the screen may remain visible on the screen, if this format is used day after day. This is known as burn-in, it is uneven wear of the screen area.

  • Page 11: External A/v Source Setup

    Also,you could use shortcut key on the remote control) or composite(AV) /S-Video Owner s Manual 11...

  • Page 12: Dtv Setup/monitor Out Setup

    Also,you could use shortcut key such as PC,DVI on the remote control) 12 Plasma Monitor...

  • Page 13: Pc Setup

    ,if necessary. Also,you could use shortcut key such as PC,DVI on the remote control) The synchronization input from horizontal and vertical frequencies are separate. Owner s Manual 13...

  • Page 14: Install The Speakers

    Í â ¹ Ò Ñ ï É ù Æ ÷ Ê ¹ Ó Ã Ë µ Ã ÷ 1 Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. (See figure), lay the two speaker aside of the PDP.

  • Page 15: Install The Stand

    Face the PDP screen upside down on a clean blanket or the bracket and pay attention not to indent the casing. (See figure) Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP .

  • Page 16

    16 Plasma Monitor...

  • Page 17: Basic Function

    Basic Function Basic Function Saving Mode Hold Q SET button pressed on the remote for 3 seconds until Quick Set mode setup menu appears on the screen. Quick Set Setup 1.Press button for desired setup option. Light Sound 2.Press button for setup option.

  • Page 18: Picture Mode

    Every press of SLEEP button, the timer will be set in the following sequence: Sleep 0Min Sleep 5Min Sleep 15Min Sleep 30Min Sleep 60Min Sleep 90Min Sleep 120Min Sleep 0Min If remaining time of set timer is to be displayed, press the SLEEP button once.

  • Page 19: Picture Quality Adjust

    Picture Quality Adjust Picture quality adjust Picture quality can be adjusted for any input separately. The picture quality on the screen can be adjusted as follows: 1. Press MENU button and until the following menu appears on the screen: AV1/S-Video menu:...

  • Page 20: Dvi Menu

    4. Repeat step 2 and 3 until desired picture quality has been achieved . When displayed time for menu setup expires without any operation , the menu disappears from the picture , If MENU or EXIT button is pressed , the menu on display will disappear in sequence or immediately respectively.

  • Page 21: Sound Adjustment

    Note: 1. Select Balance to balance right and left sound channels of the monitor . The intermediate value is 0. When indication value of Balance increases toward +50, sound of the right and left speaker becomes stronger and weaker, respectively.

  • Page 22: Adjustment Setup

    Note: mode. Adjust, RGB and Reset are functional only under VGA and DVI mode, and Auto Sync is functional in VGA 1)Adjust is opted for adjusting H Position and V Position as well as relative parameters in VGA and DVI modes.(Phase Adjust is not...

  • Page 23: Function Setup

    Repeat step 3 and 4 to select English, Francais or Espanol as the menu language. Menu timeout option Repeat step 3 and 4 to select menu display time for 5,10,15, 20, 25, 30 or 40 seconds. Menu Background Option Repeat step 3 and 4 to select OSD background between Translucent and Opaque.

  • Page 24: Calendar Display And Check

    TV Rating Limit Note: If some option is locked, the options of the same level will also be locked and the screen displays Lock . TV Rating Limit and Movie Rating Limit can only be opted when Parental Control is set to Custom.

  • Page 25: Time Setup

    . Note: The Sleep Time and Off Time can not be set at simultaneously . If both time are set , the later setup will be in operation. Indication will appear on the screen 1 minute prior to expiration of the set time.

  • Page 26: Lock Menu Options

    If the password is not correctly entered, you will be required to reenter the password and the cursor will stay stay at the first place. Press EXIT to erase the window. If time you set in OSD menu expires after th e latest press, the menu will disappear automatically.

  • Page 27: Preset Prog

    In such case, If buttons on monitor are pressed, the screen will display Child Lock, which can be erased by press of EXIT button. 5 seconds later after the latest press, the screen display will disappear auto- matically. The Child Lock mode can be resumed by entering Lock Set menu to set Child Lock off or active Unlock.

  • Page 28: Screen Menu Options

    Half Zoom Choose Half Zoom when you want to enlarge the picture vertically by enlarge top of the picture, that is the letters on the bottom are still on the screen.

  • Page 29: Troubleshooting Checklist

    Owner s Manual 29...

  • Page 30: Maintenance

    30 Plasma Monitor...

  • Page 31: Product Specifications

    42EP24S Dimensen(WXHXD) 41.3X3.4X26.1/1050X664X86 Unit::inches/mm (main compoment) 60.6/27.5 852X480(Dot) 120V~ , 60Hz Impedance Input 2X10W consumption Speakers Size(WXHXD) 4.3X21.9X2.4/110X556X62 (inches/mm) Weight 2X5.5/2X2.5 (pounds/kg) Owner s Manual 31...

  • Page 32

    Haier agrees shall be the sole and exclusive remedy available that it will, at its option, either repair the defect or to the purchaser. Correction of defects in the replace the defective product with a new or...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Marcwix Oct 06, 2017 07:09:
    Trying to find out ways of being able too hook it up to local cable t.v. cable ?