RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire.
8)Power Source ---this TV should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. e.If the unit has been dropped or damaged in any way.
(See pages 10~15 for available connection and operational setup options.) . Unpack TV and all accessories. . Connect all external video and audio equipment. See pages 10 ~ 13. Install the speakers and stand. see pages 14~16 . . Install batteries in remote control. See page 8.
Power On/Off Button Signal source input option Power Standby Indicator illuminates red in standby mode,illuminates blue when the display is turned on Down/Up. Sel ct desired option on MENU or tune to the desired channel. Remote Control Sensor VOLUME Buttons MENU Button...
Connect cable or antenna signals to the TV, either directly or through your cable box. Power Cord Socket This TV operates on AC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power Owner s Manual 7...
When using the remote control. Aim it towards the remote sensor on the TV. Function introduction FREEZE INPUT Freezes the currently-viewed picture. Ratates the source input mode. SLEEP MUTE Switches the sound on or off Press this key to set sleeptimer.
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. VIDEO INPUT POWER AUTO MUTE DISPLAY MENU EXIT ENTER P.STD VOL+ LOCK CALENDAR VOL- S.STD...
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV Do not leave a still picture from a VCR on the screen for a long If the 4:3 format is used, the fixed images on the sides of the screen may remain visible on the screen, if this format is used day after day.
How to connect Connect the audio and video cables from the external equipment's output jacks to the TV`s AV IN input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
YPbPr/YCbCr Signal How to use 480i 480p . Turn on the digital set-top box. (Refer to the owner`s manual for the digital 720p set-top box.) 1080i . Use INPUT on the remote control to select YPbPr/YCbCr, VGA, or DVI source.
PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on MENU until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
Face the PDP screen upside down on a clean blanket or the bracket and pay attention not to indent the casing. (See figure) Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP .
Press the SWITCH button on the TV to turn the TV on. . If the TV was turned off with the remote control and then the ON/OFF switch on the back of the TV. Press the SWITCH button on the back of TV and then press the POWER button on the remote control to turn the TV on.
Operation Menu 1.Press MENU button to open the main menu. Press VOL+/- button to select PIC., SOU., ADJ., SYS. , FUN. or TIME menu. 2.Press CH+/- button to select submenu, and press VOL+/- button to increase/decrease the value or select the setup.
This TV set has three methods to set channels, which are respectively Automatic search, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.
Prog. Switch Skip After the programs are presetting, you can skip some programs so that to select your favorite channels only. 1. Press CH+/- button or Direct-digit choosing button to select a channel directly. Press MENU and then use VOL+/- button to select the SYS. Menu Color Sys.
Select Auto/Off/Weak/Medium /Strong according to the image noise. Note: When Custom mode is not selected, the Custom mode can be entered automatically if Contrast, Brightness, Color, Hue and Sharpness parameters are adjusted. 20 Plasma TV...
AVC (Automatic Volume Control) Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel and reduces the volume differences between channels and programs, providing a more constant overall level.
When VGA signals are received, the automatic mode is used for parameter adjustment. Note: Adjust, RGB and Reset are functional only under VGA and DVI mode, and Auto Sync is functional in VGA mode. Display Mode This will adjust the picture ratio.
1. Press MENU button once, and then use VOL+/- button until the following menu appears on the screen: 2. Press the VOL+ button and then use CH+/- button on the remote controller to enter MENU of system setup. 3. Press CH+/- to select desired option on MENU.
3. Press the VOL+ button to select available caption items. (Off/CC1/CC2/CC3/CC4/TX1/TX2/TX3/TX4/XDS.) TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. 4. Press EXIT button to return to TV viewing.
Note: If some option is locked, the options of the same level will also be locked and the screen displays Lock . TV Rating Limit and Movie Rating Limit can only be opted when Parental Control is set to Custom.
Off/On Time Using on/off time function, the TV set can automatically turn on to a preset program or shut down in a preset Press CH+/- buttons to select "On Time", press VOL+/-buttons to select hour or minute position; then press the digital buttons to set the value of hours or minutes.
Lock Menu Options Lock Menu Options - The TV has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Lock Setup Press LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the Lock set menu will be menu willl be entered.
Child Lock Press CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode. If lock on mode is set, Child Lock is inactivated automatically. In such case, If buttons on TV are pressed, the screen will display Child Lock, which can be erased by press of EXIT button.
, you can try Auto Sync again. Sync - Caution: If a 4:3 or one to one fixed image is on the screen for a long time, it may remain visible. This is called burn-in. - Set every aspect ratio for Video, Component 480i sources.
A change in ambient humidity or temperature may result in an unusual noise Unusual sound from when the plasma display is turned on or off and does not indicate a fault with it.. inside the TV 30 Plasma TV...
TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
~110/220 Volts , 50/60Hz Color System Color Operating Temperature Range Operating Humidity Range Maximum Elevation Impedance Input 2x7W consumption Speakers Size(WxHxD) 4.3x21.9x2.4/110x556x62 (inches/mm) Weight 2x5.5/2x2.5 (pounds/kg) The specifications shown above may be changed without notice for quality improvement. 32 Plasma TV...