Table of Contents
Advertisement
TROUBLESHOOTING AND MAINTENANCE SERVICE
Under following situation
1) Shut off the power, make a check and take measures as described in the follows:
Disorder
* Power failure.
* The fuse in the inhouse switch box is burned.
No action at all
* The power plug is not inserted firmly.
* The power switch is at "off" position.
* The lock is at "open" position.
* Program selecting keys are pressed.
* The dishwasher is tilted.
Abnormal
* Chopsticks might block the sprayer.
sounds
* The sound of spraying water striking the
washing box is not abnormal.
Water leaks
* Foreign substance is jammed between the
at the door
door and the washing box.
* The draining hose is sunk.
* Ice up.
No water is
* The middle part or the end of the draining
drained out
hose is protruded too high.
* It is not abnormal that little water remains in
the washing box after operation.
2) Make a test run after faults have been eliminated.
3) When the above phenomena appear again, take off the plug and contact one of the maintenance departments.
Questions and answers
When you have any questions or the product has any abnormal phenomena, please
contact our maintenance department or the nearby after-sales service center for
consultation or service.
When you ask for service, please give us your name,address, telephone number, name and type of the
product. Describe the fault correctly. We will serve you as soon as possible.
Possible causes
Trouble shooting
* Take actions according to the above-
mentioned measures in case power failure.
* Change fuse.
* Insert the plug completely.
* Set the switch at"on"position.
* Set the lock at "close"position.
* Press to confirm.
* Level the unit.
* Pearrange them.
* Remove it and adjust it.
* Do as mentioned above for "ice up".
* Make it to normal condition.
* The protruding partsshould be less than
10cm.
Hide quick links:
Advertisement
Table of Contents
