Uninstall The Magma Driver - Magma PCI Expansion System User Manual

M A G M A
Windows XP Shut Down Windows 2000 Shut Down
After you have turned off your computer completely, it's time to
power-up again in order to complete the MAGMA software installation.
The following System Settings Change Window will appear.
Click . Your computer will reboot.
As your system comes up, if PCI cards are installed in the expansion
chassis, you may be prompted to load or locate drivers. Follow the
instructions you see on the screen and install the drivers just as you
would on a desktop computer. (You should refer to the procedures for
installing drivers that was included with the third-party PCI device(s) you
are installing) If prompted to reboot, do so.

Uninstall the MAGMA Driver

If you need to uninstall, or reinstall, the MAGMA Windows drivers, go to
the Windows Control Panel Add/Remove Programs Choose either
the MAGMA CardBus Expansion Driver (or it may appear as the
Mobility CardBus
Expansion Driver)
then choose
Change/Remove.
Refer to installation
instructions at the start
of this chapter for help
reinstalling the
Windows driver.
14 Chapter 3 Windows Driver Installation