Technical Data; Important Information - Haier HDW101SST Instructions For Use Manual

Technical data

Technical data
Technical data Technical data Technical data
Width Width
Width Width Width
Depth Depth Depth
Depth Depth
Height Height Height Height Height
Capacity Capacity
Capacity Capacity Capacity
Mains water pressure Mains water pressure Mains water pressure Mains water pressure Mains water pressure
Power supply Power supply Power supply Power supply Power supply
Maximum current intensity Maximum current intensity
Maximum current intensity Maximum current intensity Maximum current intensity
Total absorbed power Total absorbed power Total absorbed power
Total absorbed power Total absorbed power

Important information

Important information
Important information Important information Important information
Notes on waste disposal Notes on waste disposal
Notes on waste disposal Notes on waste disposal Notes on waste disposal
Old appliances still have some residual value. An environment-friendly method of disposal will ensure
that valuable raw materials can be recovered and used again.
When an appliance has reached the end of its working life,unplug it from the mains.Cut through the
mains cable and dispose of it together with the plug.
Destroy the door locking mechanism. This will ensure that children at play cannot become locked inside
and are not exposed to the risk of suffocation.
Your new appliance was protected by suitable packaging while it was on its way to you. All materials
used for this purpose are environment-friendly and can be recycled. Please make a contribution to
protecting the environment by disposing of the packaging appropriately.
Do not allow children to play with any parts of the packaging. There is a risk of suffocation by the
cardboard boxes and the plastic wrapping.
Up-to -date information concerning options for disposal can obtained from your retailer or local munici-
pal administration.
General information General information General information
General information General information
Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited
as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to
the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
12 standard place settings 12 standard place settings
12 standard place settings 12 standard place settings 12 standard place settings
0.03-1MPa 0.03-1MPa
0.03-1MPa 0.03-1MPa 0.03-1MPa
220-240V~ 50Hz 220-240V~ 50Hz 220-240V~ 50Hz
220-240V~ 50Hz 220-240V~ 50Hz
60 cm 60 cm 60 cm
60 cm 60 cm
60 cm 60 cm 60 cm
60 cm 60 cm
85 cm 85 cm
85 cm 85 cm 85 cm
13A 13A
13A 13A 13A
2100W 2100W
2100W 2100W 2100W
19