Monster Medium Articulating Mount User Manual & Warranty page 12

Installing the FlatScreen Mount
Choose a mounting location with convenient
access to an AC power outlet.
Wood Stud Mounting:
1)
Using an electronic stud sensor, locate a wall stud
at your desired mounting location.
LEVEL
2)
With the help of a friend, position the wall
CHECK
plate over wall stud. Using the provided level, confirm
that the wall plate is vertically straight.
For best results, position the level horizontally with
the narrow end flush against the side of the wall plate.
Hold the plate firmly in place.
3)
Mark the stud center in the top and bottom mounting
holes with a pencil.
4)
With your electrical drill and 3/16" bit, pre-drill a 3"
deep hole at each mark.
5)
Attach the wall plate to the wall using the supplied
lag bolts and round washers, as shown to the right.
Tighten each bolt with your electric drill or socket
wrench. Turn clockwise until secure.
6)
Attach the wall plate's Quick-Snap Screw Caps
to conceal the installed lag bolts.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
8