Monster Flatscreen User Manual & Warranty page 28

Connect Your Cable, Satellite or RF Antenna Coax
Connection to the PowerMount
1)
Connect the coax cable from your cable or satellite
service or RF antenna to the coax input labeled
"IN" on the PowerMount.
2)
Connect a second coax cable from the terminal
labeled "OUT" on the PowerMount to the coax input
on your TV.
NOTE: If not routing other AV cables through the mount,
route the coax cable to your TV through the mount's cable
management system. See above.
22
Coax Cable
OUT to TV
�������������
�������������
������ ������
��� ��
Coax Cable
IN from Wall,
Cable Box,
Satellite or
Antenna