Table of Contents
Advertisement
Available languages
Available languages
�����
�����
PowerMount
Wall Unit
PowerMount
Wall Unit
Wall
Mounting
Plate
7)
Attach the mounting plate and power unit to the
wall with the supplied lag bolts and round washers,
as shown. Tighten each bolt with your electric drill
or socket wrench.
DO NOT over tighten bolts. This can damage
the wall plate or your wall surface.
Lag Bolts and Washers
Wood Stud
3/16 in/5 mm Hole
3 in/76.2 mm Deep
3/16 in/5 mm Hole
3 in/76.2 mm Deep
13
Advertisement
Table of Contents
