Table of Contents
Advertisement
How to fill the salt
Salt
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will
form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime
and minerals from the water.
Loading the salt into the container
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:
•
When the low salt indicator "1" lights, you must fill the salt.
•
Remove the lower rack and then unscrew and remove the
cap from the salt container;
•
If you are filling the container for the first time, fill it with
water;
•
Place the end of the funnel (supplied) into the hole and
introduce about 2 kg of salt. It is normal for a small amount
of water to come out of the salt container.
•
Carefully screw the cap back on.
Important
To prevent the formation of rust, load the salt just before beginning
a wash cycle.
6
EN
Advertisement
Table of Contents
