Secure Dishwasher In Cabinet Opening - Jenn-Air JDB3650AWF4 Installation Instructions Manual

Form bare ground wire into a U-shaped hook. Wrap
ground wire hook clockwise around ground connector
screw and under the washer. Securely tighten ground
connector.
NOTE: Twist on UL Listed/CSA Certified wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using
UL Listed/CSA Certified twist-on wire connectors (not
included).
Wiring configuration
ground wire _ ground connecto r
If needed, see website for animated representation
of this step. Visit www.jenn-air.eom/eleetrieal under FAQ
tab.
Tighten strain relief screws to secure cable.
Place wires inside terminal box. Insert tabs on left side
of cover. Make sure wires are tucked inside box. Close
cover ensuring wires are not pinched. Use 1/4"nut driver
and previously removed screw to secure cover.
Secure Dishwasher in Cabinef
Opening
Check that dishwasher is still level front to back and side
to side in cabinet opening.
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
21