Secure Dishwasher In Cabinet Opening - Jenn-Air W10208727A Installation Instructions Manual

Secure Dishwasher in Cabinet
Opening
1 Double check dishwasher
alignment in cabinet opening
Check that dishwasher is still level front to back and side
to side in cabinet opening.
2
Remove lower dish rack
and place towel
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
22
3
Secure dishwasher
screw to
side cabinet
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x 1/2" Phillips-
head screws (included). The dishwasher must be secured
to keep it from shifting when door is opened.
NOTE: If side mounting you must drill pilot holes in
cabinet to prevent splitting the wood before installing
screws.
4 Check door clearance
Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs.
5 Check inner spacing
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If
spacing is not equal, loosen bracket screws secured
and shift tub. Tighten bracket screws.