Adjusting The Rear Brake Light Switch; Checking The Front And Rear Brake Pads - Yamaha Road Star XV16ARC Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Rear brake light switch
2. Rear brake light switch adjusting nut
Adjusting the rear brake light
switch
The rear brake light switch, which is ac-
6
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, adjust the brake light switch
as follows.
Turn the adjusting nut while holding the
rear brake light switch in place. To
make the brake light come on earlier,
turn the adjusting nut in direction a. To
make the brake light come on later,
turn the adjusting nut in direction b.
Checking the front and rear
brake pads
The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
EAU00713
EAU00721
Front
1. Brake pad wear indicator groove (× 2)
Front brake pads
Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear
indicator grooves have almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.
6-23
EAU03938