Table of Contents
Advertisement
6. Minimize coiling loops of excessive power and antenna cables, and do not
secure them on to the DAB2000 module. Please refer to the section on
Installation do's and don'ts later in this user guide.
7. Plug one end of the power cable into the D AB2000 module, and the
cigarette-lighter plug end into the vehicles power point. There i s a lock
mechanism on the pl ug of the power connection to the DAB2000 module.
First, plug the power cable into the 12V DC jack (1), and then turn the power
plug 90 degrees clockwise (2) as illustrated below. This will ensure that the
power cable will be connected to the DAB2000 module at all times.
8. Start to use the D AB2000 with the remote control; please refer to the
sections on OVERVIEW OF CONTROLS AND CONNECTORS and
STARTING UP THE SYSTEM later in this user guide for further
information.
Advertisement
Table of Contents
