Table of Contents
Advertisement
Note:
Each time you start the DAB2000, if the station list is empty, it will
perform a full scan of the DAB stations automatically. You may also
need to perform a scan if you drive your vehicle to a new area where
the broadcasting DAB stations are not on the current station list.
During the scanning for DAB Stations, the screen will show 《 FFF N 》 ,
in which FFF shows the current channel being scanned, and N
indicates how many stations have been detected so far.
While the scan operation is in process, you can press the Rotary
Knob at any time to stop the scan function and revert to listening to
the currently selected station.
If the DAB station list is not empty before scanning then after
completion of the D AB scan, the DAB2000 will revert to pl aying the
last DAB station automatically.
If the D AB station list is empty before scanning, the D AB2000 will
tune to the first station of the new DAB station list resulting from this
DAB scan.
If the DAB s tation list is empty before scanning, and there is no
station detected by the DAB scan, the screen will show 《 EMPTY 》.
There are no DAB stations available in the area where you performed
the DAB scan function.
To enable AFC (Automatic Frequency Change)
If your vehicle's radio does not have the AF feature then please refer to the
section To enable auto scan.
It may become necessar y to change the FM transmitting frequency as you
drive into an area where the FM frequency transmitted by the DAB2000 is
being used by an FM broadcaster. DAB2000 has an AFC function that allows
you to continuously listen to DAB programs through your vehicle's radio
system without the need to change the FM frequency manually. (Subject to
vehicle radio compatibility)
To perform this AFC function, your vehicle's radio must have the AF
(Alternative Frequency) feature and the AF feature of your vehicle radio must
be activated. When the AFC function of DAB2000 is enabled and the AF
feature of your vehicle radio is activated, your vehicle's radio will tune to an
unused FM frequency automati cally when you drive into an area where the
original FM frequency for DAB is no longer available. You do not need to do To
enable auto scan or To set the FM transmitting frequency setting in the
Advertisement
Table of Contents
