Table of Contents
Advertisement
To set antenna power
For the DAB2000 to work with the supplied active antenna, the antenna
power must be set to ON. The DAB2000 can also work with a passive antenna;
the antenna power must be set to OFF in these circumstances. If you replace
the supplied antenna with any third party antenna, you must set the antenna
power to OFF.
1.
Press the MENU button and then turn the Rotary Knob [◄] [►] until
the screen shows 《 ANTENNA 》.
2.
Press the Rotary Knob to confirm and enter the antenna power selection
operation.
3.
Then you can turn the Rotary Knob [◄] [►] until the screen displays
《 ANT ON 》to set the antenna power On.
4.
Or you can turn the Rotary Knob [◄] [►] until the screen shows 《 ANT
OFF 》to set the antenna power Off.
5.
Finally, press the Rotary Knob to confirm the antenna power setting.
Note:
The default antenna power setting is ON.
To reset DAB presets
1.
Press the MENU button and then turn the Rotary Knob [◄] [►] until
the screen displays 《 DABRESET 》.
2.
Press the Rotary Knob to perform a reset operation for DAB presets.
3.
If you do want to reset the DAB2000, turn the Rotary Knob [◄] [►] to
find 《 YES 》 and then press the Rotary Knob for confirmation. Otherwise,
you can press Rotary Knob to cancel while the screen is showing
《 NO 》.
3.1 The screen will show 《 RESETING 》to indicate that DAB reset is in
progress.
3.2 The DAB2000 will perform a scan of available DAB stations
automatically after the DAB reset is completed.
Note:
DAB reset will erase all previous DAB settings, including all memory
presets, for all DAB presets of the system, except the current FM
transmitting frequency and all FM transmitting frequency presets.
Advertisement
Table of Contents
