Table of Contents
Advertisement
Note:
The default FM frequencies saved in the FM presets F1 to F4 are
87.6MHz, 92.5MHz, 102.5MHz and 107.9MHz, respectively.
It is recommended to use the same FM frequencies saved in the
DAB2000 as FM presets in your vehicle's radio where possible.
Selecting the FM preset of your vehicle's radio and the matching FM
preset of the DAB2000 will switch the FM transmission frequency
instantly for a clear reception of the DAB station.
Saving the FM frequency into the memory of the DAB2000 does not
affect the current FM transmitting frequency; it remains on the
current FM frequency as before.
To recall an FM transmitting frequency saved in memory
You may drive into an area where the FM frequency transmitted by DAB2000
is used by an FM broadcaster. When this happens, your reception of the DAB
station will get worse with increasing interference from the other FM
transmission. Switching to a free FM frequency will ensure continuous and
clear reception of the DAB station you are currently listening to.
1.
Press the FM button, the screen will show the current FM transmitting
frequency.
2.
Press the + or – buttons to select a preset FX and the screen will show the
FM frequency saved into memory. Make a note of that frequency number .
3.
Press the Rotary Knob to confirm your selection. Alternatively, after 10
seconds timeout, the DAB2000 will set and transmit an FM signal at this
new frequency and the screen will show 《 TO Frequency 》 where
Frequency is the frequency saved in the preset FX.
4.
Check that the FM preset of your vehicles radio corresponds to the same
frequency from step 2 if you have previously saved one for DAB reception.
Otherwise, tune the vehicle radio to the same FM frequency of the
DAB2000.
5.
You can now listen to DAB stations via the new FM Frequency.
Note:
While the DAB2000 is setting a new FM transmission frequency (《 TO
Frequency 》 is displayed) with the exception of the power button,
any button is pressed during this time is ignored.
Advertisement
Table of Contents
