Table of Contents
Advertisement
To set the auxiliary input mode
The DAB2000 provides the capabi lity to play audio devices such as MP3 or
iPod ® etc. through your vehicle radio.
1.
Press the MODE button until the screen displays 《 AUX 》. Press the
Rotary Knob to confirm your selection. Alternatively, after 3 seconds,
the DAB2000 will swi tch to the auxiliary input mode and you can start
listening to the audio device.
Note:
You must connect your audio cable between the Aux-In jack of
DAB2000 and the audio device.
While in the auxiliary input mode, you must press the MODE button
and select one of the DAB preset modes to return to listening to a DAB
station.
To recall the last listened to DAB station
The DAB2000 automatically remembers the last DAB station that you were
listening to. This allows you to go back to the DAB station you were listening
to quickly; even if it is not in the memory preset list.
1.
Press the Last Station button to recall the station that was most recentl y
listened to. The screen wi ll show 《 LS EMPTY 》 if the last listened to
station has not been memorized yet or 《 station name 》 if it has.
2.
Press the Rotary Knob to confirm your selection. Alternatively, after 3
seconds, the DAB2000 will switch to the last listened to station
automatically.
To display the current FM transmitting frequency
1. Press the FM button, and the screen will show 《 Frequency 》 where
Frequency is the current FM transmitting frequency.
To set the FM transmitting frequency
You can set DAB2000 to either AFC or auto scan mode (refer to sections, To
enable AFC and To enable auto scan for further information) to change the
FM transmitting frequency. However, if you wish to change the setting and use
your own selected FM transmitting frequency manually, please follow the
steps in this section or in the sections To save a desired FM transmitting
frequency in memory, and To recall FM transmitting frequency saved
in memory to change the FM transmitting frequency manually.
Advertisement
Table of Contents
