Table of Contents
Advertisement
sections below, to switch to an unused FM transmitting frequency.
Furthermore, there are two AFC modes, AFC_H (High Sensitive) & A FC_L
(Low Sensitive). While in AFC mode, DA B2000 will constantly detect and
determine if a frequency change is necessary. Set AFC_L mode, if you
experience the FM frequency is being changed too often, and set AFC_H mode,
if you often hear static noise and the FM frequency is not changed.
By default, the DAB2000 is set to use the AFC_H mode; however, if you want
to change or return to AFC mode, do the following:
Setting on DAB2000
1.
Press the MENU button and then turn the Rotary Knob [◄] [►] until
the screen shows 《 FM MODE 》.
2.
Press the Rotary Knob to select, and then turn the Rotary Knob [◄]
[►] until the screen shows 《 AFC_H 》 or 《 AFC_L 》.
3.
Press the Rotary Knob to confirm your selection. The AFC function is
now enabled and the DAB2000 is operating in the AFC mode.
Setting on vehicle radio
1.
Enable the Alternative Frequency feature of your vehicle's radio (Consult
your vehicle radio manual or the vehicle dealer if your vehicle radio has
the AF feature, and how to enable the AF feature).
Note:
If your vehicle radio does not have the AF feature, the AFC function
must not be enabled on the DAB2000, and refer to the section below
To enable auto scan.
If the A F feature of your vehicle's radio and the DAB2000's AFC
function are not compatible, the AFC function must not be enabled;
instead, refer to the section below To enable auto scan.
The system default is AFC_H mode enabled.
When your DAB2000 identifies a need to switch the FM transmission
frequency this will usually force the ve hicle radio to change the FM
frequency automatically in most cases and the vehicle's radio display
will show 《 AF Frequency 》 where Frequency is the new frequency
DAB2000 is transmitting on.
If you hear static noise or another FM program and before AFC tunes
to a clear frequency you can force an immediate frequency change
manually by the following methods:
1. Perform an immediate frequency change; refer to section on page
21, To perform an immediate frequency change.
Advertisement
Table of Contents
