Figure 8 - Jumper Installation: Tx And Rx Only; Figure 9 - Jumper Installation: 2000 Switch In Slot 2 - Foxcom Sat-Light 7410F Installation And User Manual

7410F IFL Installation and Users Guide
2. If the 7180M has Tx or Rx units only, place all jumpers on the lower two pins.

Figure 8 - Jumper Installation: Tx and Rx Only

3. If the 2000 Switch is installed in Slot 2, place the JP1 and JP2 jumpers on the higher two pins and the JP3 and JP4
jumpers on the lower two pins.

Figure 9 - Jumper Installation: 2000 Switch in Slot 2

4. If the 2000 Switch is installed in Slot 5, place the JP1 and JP2 jumpers on the lower two pins and the JP3 and JP4
jumpers on the higher two pins.
Foxcom Proprietary Information
Document No. 93-006-01-A
Installation
22